RAM Tough-Charge wasserdichtes drahtloses Handy-Ladegerät Stabhalterung (RAM-B-149Z-A-UN12W)
Artikelnummer: RAM-B-149Z-A-UN12W-V7MDein Telefon muss über eine drahtlose Ladefunktion verfügen, damit dieses Produkt korrekt funktioniert.
Dies ist das ideale Produkt zum Aufladen deines Handys beim Motorradfahren. Der X-grip bietet einen festen Griff auf dein Telefon mit der Verwendung von wenigen Druckpunkten, so dass die Tasten auf deinem Telefon nicht gedrückt werden. Dieses Ladegerät ist kabellos und komplett wasserdicht, sodass du dir keine Sorgen machen musst, wenn es plötzlich zu regnen beginnt. Außerdem wird dieses Paket mit einem kurzen Arm und einer Lenkerhalterung geliefert, mit der du es direkt und einfach an deinem Lenker befestigen kannst - alles, was du brauchst, ist enthalten!
Mit dem wasserdichten kabellosen Ladegerät RAM Tough-Charge erhältst du auch eine Basis und ein Sicherheitsband, damit dein Telefon immer sicher an seinem Platz bleibt. Außerdem ist das Kabel mit einem Schalter ausgestattet, mit dem du das Ladegerät ausschalten kannst, wenn es nicht benutzt wird. Das System basiert außerdem auf dem B-Ball (1") aus Gummi, mit dem du die Module bei Bedarf leicht austauschen kannst. Auch musst du dich nicht um die Länge der Kabel kümmern, da diese extra enthalten sind, falls das ursprüngliche Kabel nicht lang genug ist.
Dieses Produkt verwendet die kabellose Qi-Ladetechnologie und hat eine maximale Ladeleistung von 10 W. Wenn du keinen USB-Anschluss an deinem Bike hast, kannst du direkt ein Festkabel mitbestellen, indem du diese Option wählst, bevor du das Produkt in den Warenkorb legst.
Dieses RAM Mount Set beinhaltet einen kurzen Arm von 6 cm, wenn du eine andere Länge oder ein anderes Montageteil suchst, stell dir dein eigenes Set aus unseren Einzelteilen zusammen !
Spezifikation | Beschreibung |
---|---|
Spezifikationen | Eingangsleistung:5V-2A; 9V-1.67A Ausgang: 5W / 7.5W / 10W Umwandlungswirkungsgrad: 85% Max Sendeabstand: 5-8mm Arbeitsfrequenz: 110-205KHZ Produkt-Standard: WPC v.1.2.4 QI-kompatibel Kompatibel mit QC2.0/QC3.0 Stromversorgungen |
Einschließlich | (1) Sicherheitsleine (1) Klebetube für Gummikappen (1) Wiegebein (1) Abdeckung für Halterungsbein (1) Silikonhülle für wasserdichte USB-Verbindung (1) Festverdrahtetes Ladegerät mit Kabel (4) Kleine Kabelbinder (4) Große Kabelbinder (1) 1/4"-20 U-Bolzen für .5" - 1" Schienen (1) 1/4"-20 Bügelschraube für 1" - 1,25" Schienen (2) 1/4"-20 Nylock-Muttern (2) Gummikappen (1) U-Bolzen-Abstandhalter |
Garantie | 1 Jahr |